Headers 49 GMC

[e015475]

No traction over on the Advanced Design forum, so I thought I'd try here.

49 GMC with an 5.3L LS motor moved back in the firewall about 3". Using a 5spd and want to keep my pedals on the floor for that nostalgic look. Had 2010 LS Camaro shorties but they wouldn't clear the pedals. Between the motor mounts, steering and the pedals, it looks like I have to go over the frame and into the fender well

Here's a shot at my initial attempt -


These are plastic header modeling blocks from Icengineworks. Here's the second iteration of the design. The tube lengths are within about 10% of each other and nominal primary length is 29". At full lock, the front wheels clear the header by about 1.5"


The plywood just keeps the tubes aligned. The header 'lego' kit is a little short on straight pieces so I have a gap at the collector

Here's another shot-


About to place an order for some stainless tubing - any comments or suggestions on the design before I do?