49' Patina bagged in PA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

99 to Life · 04-15-2015, 11:47 AM

reaper, is the striker suppose to be tight in the claw? with mine they have play back and forth which seems odd to me. So I'd have to be extremely accurate in where the striker lands so its on the far end of the claw so it can't move back and forth. I don't it if moched up yet to shut it and see how it performs.

here is a deadbolt lock I made for my 51'. It mounts behind the door jam and sends the bolt through the door. It's powered by a remote.

I'm thinking about making a set for this truck, so I can just keep the bear claws to a minimal. I'll already have to fab up a bracket to either run an actuator inside and or make it so the turn down handles work with the mech, which seems like a lot of pissing around.

04-15-2015, 11:47 AM	#11
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: 49' Patina bagged in PA reaper, is the striker suppose to be tight in the claw? with mine they have play back and forth which seems odd to me. So I'd have to be extremely accurate in where the striker lands so its on the far end of the claw so it can't move back and forth. I don't it if moched up yet to shut it and see how it performs. here is a deadbolt lock I made for my 51'. It mounts behind the door jam and sends the bolt through the door. It's powered by a remote. I'm thinking about making a set for this truck, so I can just keep the bear claws to a minimal. I'll already have to fab up a bracket to either run an actuator inside and or make it so the turn down handles work with the mech, which seems like a lot of pissing around. Attached Images __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.