5 speed LS 72 Blazer build

[LS Blazer]

It has been a long time since I posted! Much has happened with the Blazer, but not much that is picture worthy-although I'll probably post some pics anyway!
since my last post, we have installed the steering system, mated it to the power steering pump from the motor, started mounting the brake booster and master cylinder, as well as the clutch master cylinder, purchased the seats I'll be using(front row out of a 2001 dodge ram. back seats-3rd row out of a Tahoe), took the heads off and had them machined, solved the cross member issue by using the one that came with my 208 T-case, installed a PSI engine harness(awesome, by the way) ordered a body harness from Painless, and cut/remounted the perches on the rear end in order to use a CV drive shaft because the operating angle at the U-joints was way too steep to do it any other way.
Brakes and A/C system are hopefully going in this weekend, as well as lining the entire tub with heat/sound barrier. If I get all of that done and still have some energy left, I'll start fabbing the brackets to make my seats work.
Pictures to follow!