? About rotors & spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Boog** · 05-02-2015, 11:09 AM

I see drop spindles listed for rotor thicknesses 1", 1 1/8", 1 1/4" for some of the 73-87 model years. I can see it being confusing.
I am looking to buy spindles and want to get the right ones. I have an 82 front end under my 69. My rotors measure 1" thick and dont appear to have been turned. It looks like most of the spindles offered are for the 1 1/4" rotors.
And Im not interested in modular ones.
I have 1" thick rotors. I just want a 2 1/2" drop spindle that will bolt in using my existing components. Is there one? Thanks

05-02-2015, 11:09 AM	#1
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,536	? About rotors & spindles I see drop spindles listed for rotor thicknesses 1", 1 1/8", 1 1/4" for some of the 73-87 model years. I can see it being confusing. I am looking to buy spindles and want to get the right ones. I have an 82 front end under my 69. My rotors measure 1" thick and dont appear to have been turned. It looks like most of the spindles offered are for the 1 1/4" rotors. And Im not interested in modular ones. I have 1" thick rotors. I just want a 2 1/2" drop spindle that will bolt in using my existing components. Is there one? Thanks __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.