|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
06-11-2015, 04:43 PM
|
#1 |
|
Registered User
 Join Date: Sep 2001
Location: Ontario New Yak
Posts: 843
|
Dana 44 closed knucle preload
I doing the front end. New bearings and stuff on a Dana 44 8 bolt closed knuckle 68 1/2 ton. I'm at 4 ft lbs turning resistance with a torque wrench on the one of the trunnion bolts. Dana manual says 5-10 ft pounds...
I've done Dana closed knuckle Jeeps at 3 foot pounds and never had a death wobble or shimmy... What do you say? Thanks |
|
|
| Bookmarks |
|
|
Threaded Mode