Jorgensenc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70 longbed · 02-12-2004, 03:08 AM

Jorgensenc,

I have downloaded all your pics, and your and instructions, but still have a question or two.

Do the holes that you drill in the back of the opening matchup with any of the holes on the plastic filler tray, or am going to drill new holes in the filler tray and move the clip nuts to match what I drill in the opening? Make sense?

I guess that I end up with the two bolts holding the tray to the body, and the bracket that supports the neck from underneath. Then the two bolts that hold the door/light in place?

02-12-2004, 03:08 AM	#1
70 longbed Senior Member Join Date: Oct 2002 Location: Sierra Vista, AZ Posts: 489	Jorgensenc Jorgensenc, I have downloaded all your pics, and your and instructions, but still have a question or two. Do the holes that you drill in the back of the opening matchup with any of the holes on the plastic filler tray, or am going to drill new holes in the filler tray and move the clip nuts to match what I drill in the opening? Make sense? I guess that I end up with the two bolts holding the tray to the body, and the bracket that supports the neck from underneath. Then the two bolts that hold the door/light in place? __________________ Keith 70 CST longbed in progress. Hoping to get it back on the road soon.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.