Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

watahyahknow · 07-09-2015, 12:05 PM

the rustspots arent too bad , at least the metal mis only bend one way and its simple to cut out the hole and make a little plate to weld inside it

i like the round bar idea , making it totally smooth kindah makes the roof look an inch too high compared to the top gap above the doors and the windows
keeping the line across breaks it up a little , might use the same idea to make new moulded in gutters on my '78 pickup
just make sure theres no way that water can get in between the sheetmetal , the rod and the weld on the underside of the rod , might be a good idea to run a bead of automotive sealer over the top of it

07-09-2015, 12:05 PM	#11
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Slosh Tubz SEMA 2015 Build "BOOSTED BERTHA" the rustspots arent too bad , at least the metal mis only bend one way and its simple to cut out the hole and make a little plate to weld inside it i like the round bar idea , making it totally smooth kindah makes the roof look an inch too high compared to the top gap above the doors and the windows keeping the line across breaks it up a little , might use the same idea to make new moulded in gutters on my '78 pickup just make sure theres no way that water can get in between the sheetmetal , the rod and the weld on the underside of the rod , might be a good idea to run a bead of automotive sealer over the top of it __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.