1995 Sierra RCSB 2WD DD - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OutlawDrifter · 07-13-2015, 05:06 PM

well i took last friday off and got to cranking on the two-tone. my worst fears on this part of the project were realized when i started sanding the passenger side cab corner...it was rusted through. so with no time to run to KC to get a patch panel, i fab'd up some pieces and made it work.

then taped everything off and knocked the finish down with the da.

2 coats of epoxy primer

3 coats of color

3 coats of clear

everything but the first line of blue tape pulled, almost went back and bought a blue pinstripe i liked it so well.

07-13-2015, 05:06 PM	#11
OutlawDrifter Registered User Join Date: Aug 2012 Location: Northeast KS Posts: 1,789	Re: 1995 Sierra RCSB 2WD DD well i took last friday off and got to cranking on the two-tone. my worst fears on this part of the project were realized when i started sanding the passenger side cab corner...it was rusted through. so with no time to run to KC to get a patch panel, i fab'd up some pieces and made it work. then taped everything off and knocked the finish down with the da. 2 coats of epoxy primer 3 coats of color 3 coats of clear everything but the first line of blue tape pulled, almost went back and bought a blue pinstripe i liked it so well. __________________ 1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.