Best $35 I have spent so far... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ekgguy · 07-20-2015, 12:06 PM

For the money, this is the best $35 that I have spent buying tools for what needs to be done for this project.

This turns your MIG welder into a stud gun machine and allows you to pull dents without making holes in the panel.

I tried it for the first time today on a couple of shallow dents and it pulled them out easily. A couple of the more complicated ones, I had to weld a few, pull, remove and weld a few more... but eventually it pulled them most of the way out. Clip them off with a pair of wire cutters and a minimal hit with the flap disk then off to the next one.

07-20-2015, 12:06 PM	#1
ekgguy Registered User Join Date: Jan 2012 Location: Humble, Texas Posts: 414	Best $35 I have spent so far... For the money, this is the best $35 that I have spent buying tools for what needs to be done for this project. This turns your MIG welder into a stud gun machine and allows you to pull dents without making holes in the panel. I tried it for the first time today on a couple of shallow dents and it pulled them out easily. A couple of the more complicated ones, I had to weld a few, pull, remove and weld a few more... but eventually it pulled them most of the way out. Clip them off with a pair of wire cutters and a minimal hit with the flap disk then off to the next one. __________________ Matt Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=672655 "Father thank you for the gathering of friends, Father we give thanks for all the choices we've made because that's what makes us who we are, let us forever cherish the loved ones we've lost along the way and most of all *THANK YOU FOR FAST CARS!"*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.