Fried alternator; truck won't start. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Norcalsully · 07-20-2015, 11:27 PM

After suffering a bad ground, I fried the positive lead to my alternator. Full melt down: smoke and melted wire coating. I replaced the alternator and positive feed. The truck won't start, I turn the key and get absolutely nothing. Battery has juice, starter has juice, line to the alternator is hot. My '70 step side definitely needs a new harness but in the interim any ideas to get her started?

All help is definitely appreciated. Thanks?
Name: image.jpg
Views: 487
Size: 82.5 KB

Name: image.jpg
Views: 487
Size: 82.5 KB

07-20-2015, 11:27 PM	#1
Norcalsully Registered User Join Date: Apr 2015 Location: San Francisco, CA Posts: 21	Fried alternator; truck won't start. After suffering a bad ground, I fried the positive lead to my alternator. Full melt down: smoke and melted wire coating. I replaced the alternator and positive feed. The truck won't start, I turn the key and get absolutely nothing. Battery has juice, starter has juice, line to the alternator is hot. My '70 step side definitely needs a new harness but in the interim any ideas to get her started? All help is definitely appreciated. Thanks?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.