Information needed on LED side marker lights - The 1947 - Present Chevrolet & GMC Truck Message Board Network

07-24-2015, 12:49 PM

#21

Andy4639

Old member

Join Date: Jan 2002

Location: Liberty, & Garden City S.C. , U.S.

Posts: 19,945

Re: Information needed on LED side marker lights

Quote:

Originally Posted by 72kool

ok so if i want led sidemarkers, that blink with the turn signal, i have to wire them each into a flasher and not just wire them into the blinker wire? just making sure. i know its a dumb question.

No! The wiring is OK you just need to swap the flashers in the fuse box to make them work. The LED's don't have enough resistance to activate if you don't swap the flasher in the fuse box. The new flasher will have to be grounded also.

On the rear side lights you will need to add the wiring since they never blinked from the factory.

__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71

Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour

http://upstategmtrucks.com/

Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -4. The time now is 08:06 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.