Master Cylinder for Disk/Disk Setup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nuke82 · 07-25-2015, 06:53 PM

I'm looking for a cheap master cylinder to use on my 72 C-10 with disk/disk power brakes. If it matters the front calipers are stock and rear are 79 Lincoln Versailles (need to grind that Ford symbol off the calipers!).

I was looking at POL master cylinders but am hesitant because they are 1" bore.

https://www.performanceonline.com/Di...h-Performance/

I also understand a vette m/c can be used but was only able to find recommended part numbers for non powered systems.

Any recommendations?

07-25-2015, 06:53 PM	#1
nuke82 Registered User Join Date: Feb 2013 Location: Moore, OK Posts: 53	Master Cylinder for Disk/Disk Setup I'm looking for a cheap master cylinder to use on my 72 C-10 with disk/disk power brakes. If it matters the front calipers are stock and rear are 79 Lincoln Versailles (need to grind that Ford symbol off the calipers!). I was looking at POL master cylinders but am hesitant because they are 1" bore. https://www.performanceonline.com/Di...h-Performance/ I also understand a vette m/c can be used but was only able to find recommended part numbers for non powered systems. Any recommendations? __________________ 72 Chevy C-10 w/ 67 front clip 355 ci Vortec 79 Lincoln Versailles 9" rear end, 390 gears 700R4 tranny McGaughy's 2.5" Front Drop Fatbar 4-Link



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.