New to me 70 Blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RandumbHero · 08-13-2015, 09:44 AM

What's up ya'll?

Just purchased a 1970 Blazer CST. It needs a lot of interior work and has plenty of rust. I have a few recommendations for some hobbyists that weld and do good body work on the side. Otherwise its a running and driving K5 with a 454/SM465. I've noticed a few other things that need to be fixed with that. The front drive shaft is a little too close to the passenger side exhaust header flange and the steering is pretty loose. I've learned a lot from reading here the past two weeks hopefully I get to apply it soon.

08-13-2015, 09:44 AM	#1
RandumbHero Registered User Join Date: Aug 2015 Location: Natalia, TX Posts: 6	New to me 70 Blazer What's up ya'll? Just purchased a 1970 Blazer CST. It needs a lot of interior work and has plenty of rust. I have a few recommendations for some hobbyists that weld and do good body work on the side. Otherwise its a running and driving K5 with a 454/SM465. I've noticed a few other things that need to be fixed with that. The front drive shaft is a little too close to the passenger side exhaust header flange and the steering is pretty loose. I've learned a lot from reading here the past two weeks hopefully I get to apply it soon.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.