Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-17-2015, 01:46 PM | #1 |
Registered User
Join Date: Nov 2007
Location: Bay Area, Ca
Posts: 2,841
|
Another 9.24 this weekend
First pass was was in the 9.3x range @ 144.x mph with a 1.5x 60'. First pass on a brand new set of radials.
next pass was an equal to my previous best, exactly the same ET 9.247.. Here is the break down: --- -----7/11 -- 8/15 60 -----1.414 - 1.424 330 ----3.811 - 3.843 1/8 ----5.870 - 5.905 MPH ---118.41-118.71 1000 ---7.681 - 7.705 1/4 ----9.247-- 9.247 MPH ---142.49- 145.23 Only difference was the new set of radials. I need to ramp the N20 in a bit faster. The next pass I ramped the N20 in a bit faster but I think it spun just a pinch 1.43 and it slowed down as it was my 3rd 300hit pass with a 15lb bottle.. 5.956@116.96 and 9.387@140.0 Last pass I had real bad wheel hop during the burn out. Left with a 1.436 60', and about the 1/8 the vibration was bad through the 1/4. Threw a wheel weight. went 9.325 @ 142.84. It needs a converter change for sure. I hope that gains me a few % of efficiency so I don't need to go to a 3.73. Going to try and get the front end on before next outing. I know there is some form of high 9.0x to low 9.1x in this tune up. Just need to find it.
__________________
------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49 |
Bookmarks |
|
|