![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Apr 2010
Location: las vegas
Posts: 299
|
Power steering frame damage fix
Ok guys, long story short I've had my truck for about 5 years now, the P/O did a power steering swap, and did not do it the correct way. Instead of an adapter plate they used nuts as spacers putting a lot of stress on the bolts. I noticed a lot of play in my steering, so i decided to take a closer look. i tried adjusting the allen nut on the box and it did nothing. Something seemed wrong. I took the box off and inspected everything. turns out the rag joint had about 75% of its teeth for the splines worn off. That was my problem, box is fine. BUT, i then noticed the crack in the frame. here are some pics, along with my plan of attack. Comments and advice from experience appreciated.
I ordered the adapter plate from captainfab, its on its way (thanks captainfab ![]() As far as the repair. i drilled 1/16th holes at the ends of the crack to prevent any further crackage. should i then, a) cut a small bevel into the crack and weld IN/ALONG the crack from beginning to end --------- b) perform more of a stitch weld going across the weld from one side of the crack to the other /\/\/\/\/\/\ the adapter plate will be "stitch" welded, not welded continuously, after repair. |
![]() |
![]() |
Bookmarks |
|
|