Knomadd '71 SWB C-10

[knomadd]

Ok, so I made a little progress this weekend... I did a bunch of research and realized my air tanks and compressors had too much angle on them, so I had to re-drill/relocate my brackets on the driver's side. Unfortunately I had just finished drilling for the passenger side, so I had to re-drill those holes too.

As for pictures I did take... Not very exciting, but still progress.

I replaced the brake lines with stainless, replaced the rubber fuel line with hard line (from the filter to the front cross member - Still flexible hose between tank and filter and frame to fuel pump), added a newer canister style fuel filter from a 90's Silverado (ready for fuel injection at a later phase), and got it all strapped down with the original hardware.

Note: you can see the re-drilled hole at the lower left of the first pic.