72 C10 McGauphy's Big Brake Kit

[1bad396ss]

I bought this kit almost 2 years ago. The kit is for a 72 as my engine cradle, a-arms, rods etc are all off a 72 - so the brake lines run to the front of the engine cradle instead of the back. The rubber lines are too short at approximately 15 inches long. One end of the line is 3/8 x 24 IFF and the caliper side is whatever a 2000 1/2 ton GM truck is (as that is what the caliper is from).

The vendor I used was no help and McGauph's said they extend the hard lines, which I have never seen or read on here. Figured they would include them if that is the case.

Can someone point me in a good direction to get proper line length and possibly custom lines if that is the only option.