CPP Tie Rod Sleeves Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**KyleSeal** · 09-01-2015, 10:13 PM

So I'm interested in a set of CPP's tie rod sleeves because they seem easier to work with, and I'd rather put money into something others use and has a good company backing it.

My question - I'm replacing both inner and outer tie rods so will the sleeves from CPP work with the stock replacement tie rods? Also, I've seen some talk of 'longer' or 'shorter' sleeves and a tie rod drop kit - I have a 3 / 5 drop, so do I need longer or shorter ones?

Future plan: I'm looking to get to a 5.5/7 drop in the future (add drop spindles w/ disc & blocks in the back).

Truck: 1970 C10 with the stock (power) steering.

Also if there's anything else I seem to be overlooking, please tell me.

09-01-2015, 10:13 PM	#1
KyleSeal Senior Member Join Date: Mar 2014 Location: Toano, VA Posts: 884	CPP Tie Rod Sleeves Question So I'm interested in a set of CPP's tie rod sleeves because they seem easier to work with, and I'd rather put money into something others use and has a good company backing it. My question - I'm replacing both inner and outer tie rods so will the sleeves from CPP work with the stock replacement tie rods? Also, I've seen some talk of 'longer' or 'shorter' sleeves and a tie rod drop kit - I have a 3 / 5 drop, so do I need longer or shorter ones? Future plan: I'm looking to get to a 5.5/7 drop in the future (add drop spindles w/ disc & blocks in the back). Truck: 1970 C10 with the stock (power) steering. Also if there's anything else I seem to be overlooking, please tell me. __________________ "Sometimes I do serve as a good bad example. Glad to be of service." My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.