06 gremlens - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hugger6933 · 10-02-2015, 06:35 PM

I have a truck that i put a cab shell on but it was doing this before cause i tryed to start it before tearing into it. The headlamps don't have high beam the directional signals don't work the horn won't blow and most of all it won't crank over. The horn is wired ok cause I can make it blow with the Tech2. Along that note as well the tech2 says the key is not in the ignition with the key on. I'm thinking the ign sw may be my problem not recognizing the key. anybody got any thoughts?

10-02-2015, 06:35 PM	#1
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,280	06 gremlens I have a truck that i put a cab shell on but it was doing this before cause i tryed to start it before tearing into it. The headlamps don't have high beam the directional signals don't work the horn won't blow and most of all it won't crank over. The horn is wired ok cause I can make it blow with the Tech2. Along that note as well the tech2 says the key is not in the ignition with the key on. I'm thinking the ign sw may be my problem not recognizing the key. anybody got any thoughts?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.