Clutch linkage adjustments - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Myoldtruck · 10-26-2015, 10:05 AM

Hello all. Ive had my c10 for 4 weeks now and looking to see if there is any adjustments to the clutch linkage I can do to make pushing the pedal down not so much of a chore.

On the short list im going to do: Grease the Z-bar, grease linkage shafts, Install correct frame return spring.

Ive also read that there should be about 1" inch of travel in the clutch pedal before any engagement, so the pedal travels some. Any thoughts on that.

10-26-2015, 10:05 AM	#1
Myoldtruck Registered User Join Date: Sep 2015 Location: Mohnton pa. Posts: 208	Clutch linkage adjustments Hello all. Ive had my c10 for 4 weeks now and looking to see if there is any adjustments to the clutch linkage I can do to make pushing the pedal down not so much of a chore. On the short list im going to do: Grease the Z-bar, grease linkage shafts, Install correct frame return spring. Ive also read that there should be about 1" inch of travel in the clutch pedal before any engagement, so the pedal travels some. Any thoughts on that.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.