Air compressor regulator issues? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C1ph3r · 11-13-2015, 10:39 AM

So I have a 33 gallon Craftsman air compressor. 4.9 cfm @90 psi.

I noticed an issue a while back that whenever I use a grinder, impact or whatever, the tool works great when the trigger is first pulled. But then it falls off. So to get full pressure I have to pulse the trigger. If I hold down the trigger the pressure drops quite a bit and the tool becomes useless. I have to pause and then start again.

Could this be a bad regulator?

11-13-2015, 10:39 AM	#1
C1ph3r Registered User Join Date: Nov 2015 Location: Concord NC Posts: 262	Air compressor regulator issues? So I have a 33 gallon Craftsman air compressor. 4.9 cfm @90 psi. I noticed an issue a while back that whenever I use a grinder, impact or whatever, the tool works great when the trigger is first pulled. But then it falls off. So to get full pressure I have to pulse the trigger. If I hold down the trigger the pressure drops quite a bit and the tool becomes useless. I have to pause and then start again. Could this be a bad regulator? __________________ ~~~~~~~~~~~~~~~~~* 1970 C-10 LWB Build Thread



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.