KS Manual X-member F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 11-25-2015, 10:36 AM

Removed from a '71 2wd frame with 350 sbc perches, no engine or trans in it when removed, hot rivited to frame. Was told it had a 350 v8 and Muncie car 4 speed but can not verify that. Truck was rolled when I bought it for parts but the floor pan (low hump) was cut for an after market shift stick. Have verified the x-member is for a standard trans after searching thru many threads. Solid but needs a wire brush/cleaning to remove some dirt and grime. $25 plus shipping, money order or $$ only, do not have Paypal.

11-25-2015, 10:36 AM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Manual X-member F/S Removed from a '71 2wd frame with 350 sbc perches, no engine or trans in it when removed, hot rivited to frame. Was told it had a 350 v8 and Muncie car 4 speed but can not verify that. Truck was rolled when I bought it for parts but the floor pan (low hump) was cut for an after market shift stick. Have verified the x-member is for a standard trans after searching thru many threads. Solid but needs a wire brush/cleaning to remove some dirt and grime. $25 plus shipping, money order or $$ only, do not have Paypal. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 11-27-2015 at 02:26 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.