Steering column rebuild question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**rgunlock** · 01-18-2016, 11:43 AM

I'm about ready to install the column in my 78 GMC. While its still out I would like to deal with anything that is likely worn. It is a non-tilt column and I've got a 4-speed floor shift so this is a pretty basic column. I know that I want to replace the rubber boot on the steering coupler as well as the rag joint. I haven't had a chance to drive the truck enough to know whether there were other problems or not.

What would you replace while you were at it? Anyone with a good link to a column rebuild?

Thanks

01-18-2016, 11:43 AM	#1
rgunlock Senior Member Join Date: Jul 2009 Location: Tomball, Texas Posts: 1,592	Steering column rebuild question I'm about ready to install the column in my 78 GMC. While its still out I would like to deal with anything that is likely worn. It is a non-tilt column and I've got a 4-speed floor shift so this is a pretty basic column. I know that I want to replace the rubber boot on the steering coupler as well as the rag joint. I haven't had a chance to drive the truck enough to know whether there were other problems or not. What would you replace while you were at it? Anyone with a good link to a column rebuild? Thanks Attached Images __________________ Rick 78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel 71 GMC C25 350/TH400 - Project Angie 59 Chevy SWB Stepside (next in line? Not sure now ) 2001 GMC Sierra K2500



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.