Alarm, Wiring

[RICHARD MORGAN]

I WANT TO INSTALL A DEI VIPER 850 ALARM. I WAS WANTING TO GET A LITTLE ADVISE BEFORE I STARTED. I PLAN ON RUNNING THE STARTER DISABLE TO THE IGNITION WIRE , WIRING INTO THE PARKING LIGHTS TO FLASH WHEN ALARM IS ACTIVATED, AND TAPPING INTO THE FACTORY DOOR TRIGGERS. ID ALSO LIKE TO PUT A PIN (LIKE A DOOR TRIGGER) FOR THE HOOD.
WHAT DO YOU GUYS THINK ABOUT PUTTING A HIDDEN SWITCH ON THE FUEL PUMP? DISABLING THE ALARM ISNT THAT HARD. EITHER IS JUMPING ACROSS THE STARTER UNDER THE HOOD. BUT I THINK AS A LAST RESORT THE FUEL PUMP SWITCH WOULD BE A GOOD THEFT DETERENT. AT THE MOST THEYD GET A BLOCK DOWN THE ROAD AND THEN THEYLL BE BROKE DOWN. I DOUBT THEYLL STICK AROUND IN THE MIDDLE OF THE ROAD TO TROUBLE SHOOT IT. BUT BEFORE I START I NEED TO KNOW THE COLORS OF SOME WIRES . AS FAR AS I SEE THE COLORS SHOULD BE AS FOLLOWED. LET ME KNOW IF IM INCORRECT.

IGNITION- PURPLE
PARKING LIGHTS- BROWN
DOOR TRIGGERS- ORANGE & WHITE


THANKS