Loadmaster '47 COE

[47 Fasttoys]

OK, so I have been making a little progress on 2 projects: On the speaker panel project I have mounted the grill using 2 small hinges and a piece of nylon strap I cut from an old folding chair bag. I also added a magnet I pulled off the fridge to hold it closed. Works great and cleans things up a bit. I'm also back on the engine compressor mount project. Working on building the mount. It will all fit but I will need to add a smooth pulley in place of the groved tensioner pulley to keep the belt from rubbing the lower radiator hose. I will need to mill 1 ear down due to the mounting leg of the compressor mount. I will also need to support the plate from below. I think I can use the alternator mounting tabs as pick up points for the lower legs. Of course I will also need a longer belt.
Rob