Fuel gauge no realding after tank was cleaned and lined - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kw69 · 01-29-2016, 01:36 PM

Hey guys,

Thinking caps on, ok had the fuel tank cleaned and lined from the shop. Put it all back together and my gauge does not work. Put a new sending unit in and still reads no fuel. Pulled the sending unit back out, held it in my hand touched the side of the tank and bingo it works the fuel gauge. U can then move the float and it works. Put it back into the tank and it goes to zero or no fuel....now it all works fine prior removing the tank. What gives? The wire is fine, both connections are good, what am I missing. Thanks in advance,
Kris

01-29-2016, 01:36 PM	#1
Kw69 Registered User Join Date: Sep 2015 Location: Florida Posts: 111	Fuel gauge no realding after tank was cleaned and lined Hey guys, Thinking caps on, ok had the fuel tank cleaned and lined from the shop. Put it all back together and my gauge does not work. Put a new sending unit in and still reads no fuel. Pulled the sending unit back out, held it in my hand touched the side of the tank and bingo it works the fuel gauge. U can then move the float and it works. Put it back into the tank and it goes to zero or no fuel....now it all works fine prior removing the tank. What gives? The wire is fine, both connections are good, what am I missing. Thanks in advance, Kris __________________ 2009 GMC 2500HD 6.0, 6 speed auto, stealth grey, 4x4 Z71, Bilsteins, Black Bear Tuned. Pulls the 10k fifth wheel all so easy. 1969 CST 350 black long bed, 3 on the floor, PS, AC, drum brakes, old school and love it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.