2001 brakes on my 69 C10

[gruveb]

I read the FAQ on brake swaps and could find nothing about what my truck has, so I thought I'd share. My front right wheel bearing was going out and I needed to go ahead and change the tie rods on that side. I wasn't sure if the tie rods were from the 69 or 01. It looks like the bolted the 01 spindle right on the 69 A-arm.

Everything but the brakes and spindle seem to be 69.

The caliper pin T50 head is stripped though, all of the replacements I found at the shops are 1/8th of an inch too long...I'd prefer not having hex bolts and metric crap.

Anyhow, the swap was done and works.