9 volts w/ CS144 and AAW 500560 harness

[Joemomma1]

The attached diagram shows how i have my truck wired. With the key turned to the accessory postilion i have 12.5 volts at all circuits except the four I have circled. I have 9 volts at each of those fuses.
I get 14.5-14.75 volts while running at the battery.
With the key switched to accessory If I remove the two wire plug at the back of the alternator I get the full 12.5 volts at the circuits in question. The brown wire has a 82 ohm 3 watt resistor soldered inline as required by this series of alternator. Any help is appreciated. I know I'm not being too detailed but wanted to post this up quickly. Thanks