LS factory cruise control hook up

[XwalkerX]

just hooked up all the wires again and with the key on im still getting a reading of 7v at the wire for pin G where it connects to the brake lamps. this is causing not only a noticeable draw on the battery via my voltmeter but also causing a very faint brake light to be on all the time.

still with key on and taking readings at the module with the connector plugged into it im getting these readings

a- 0v (toggle switch is in the off position)
b- 0v
c- 0v
d- 12v
e- 0v
f- 12v
g- 10v
h- n/a
j- 0v
k- 9v