350/290 Horse Crate Engine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**davischevy** · 04-04-2016, 10:39 PM

The kids old 70 K10 4X4 still ran fair and didn't use oil but had one or two leaking valves.

We looked at all options with the parameters being a balance of power driveability and looking stock.

When we settled on the 290 horse, out biggest concern was vacuum to run the brakes.

Well, we got it running today and what a pleasant surprise.

The brakes actually work better than before, my daughter will be able to drive it without any problem, and it has just enough lope at idle to get attention at the stoplight.

The power is more than acceptable for towing a boat or trailer.

For the money I couldn't be happier.

04-04-2016, 10:39 PM	#1
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	350/290 Horse Crate Engine The kids old 70 K10 4X4 still ran fair and didn't use oil but had one or two leaking valves. We looked at all options with the parameters being a balance of power driveability and looking stock. When we settled on the 290 horse, out biggest concern was vacuum to run the brakes. Well, we got it running today and what a pleasant surprise. The brakes actually work better than before, my daughter will be able to drive it without any problem, and it has just enough lope at idle to get attention at the stoplight. The power is more than acceptable for towing a boat or trailer. For the money I couldn't be happier. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.