Torsion bars - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OldChevy61 · 04-08-2016, 08:51 PM

I have a small dilemma. I redone the frame,replaced all steering parts. Torsion bars were marked when removed left and right. I am about ready to install the engine and set the cab back on. Torsion keys are basically all the way down and just noticed one side is very stiff, the other not so much. I can stand on the frame and bounce the drivers side, passenger side not hardly at all. Seems one side needs to come back out and be turned a notch. Which one would be correct?

04-08-2016, 08:51 PM	#1
OldChevy61 Registered User Join Date: Apr 2015 Location: NICHOLS SC Posts: 435	Torsion bars I have a small dilemma. I redone the frame,replaced all steering parts. Torsion bars were marked when removed left and right. I am about ready to install the engine and set the cab back on. Torsion keys are basically all the way down and just noticed one side is very stiff, the other not so much. I can stand on the frame and bounce the drivers side, passenger side not hardly at all. Seems one side needs to come back out and be turned a notch. Which one would be correct?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.