I know you guys don't like boring threads but I need help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AustinBelair · 05-16-2016, 10:03 PM

I'm hoping I can get some help on this new 66 with a 292ci I just picked up. It has a BAD exhaust leak and upon further inspection there was no gaskets between the intake and exhaust manifolds and the bolts and nuts were missing so it was building a HUGE amount of carbon.

I took it all apart and tried to start assembling it. This is the bottom of the intake

This are the 2 gaskets I got in the kit:

and

Which one do I use? It's a Texas truck with the stock motor, carb, intake, exhaust manifold etc.

05-16-2016, 10:03 PM	#1
AustinBelair Registered User Join Date: Apr 2005 Location: Austin, Texas Posts: 300	I know you guys don't like boring threads but I need help I'm hoping I can get some help on this new 66 with a 292ci I just picked up. It has a BAD exhaust leak and upon further inspection there was no gaskets between the intake and exhaust manifolds and the bolts and nuts were missing so it was building a HUGE amount of carbon. I took it all apart and tried to start assembling it. This is the bottom of the intake This are the 2 gaskets I got in the kit: and Which one do I use? It's a Texas truck with the stock motor, carb, intake, exhaust manifold etc. __________________ My mother is a recent cancer survivor and this truck build is for her



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.