Wheel Mount Surface Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RyansToy · 05-31-2016, 08:18 AM

So yesterday I had some tires mounted to 17" steel wheels (late model donor).

I noticed I was having a hard time torquing the lug nuts. They were loose every time I went around the star...

There appears to be "dowels" protruding in 3 spots on the front drums.

The image show's holes, but mine has what appears to be dowel pins sticking out.

This image shows the locations inbetween the lugs better. They are just holes on this drum. Two wheels on the truck have features to clear these pins. Two on the back do not. I drilled the new wheels to clear them. What are they??

05-31-2016, 08:18 AM	#1
RyansToy Registered User Join Date: Aug 2015 Location: Nova Scotia Canada Posts: 145	Wheel Mount Surface Question So yesterday I had some tires mounted to 17" steel wheels (late model donor). I noticed I was having a hard time torquing the lug nuts. They were loose every time I went around the star... There appears to be "dowels" protruding in 3 spots on the front drums. The image show's holes, but mine has what appears to be dowel pins sticking out. This image shows the locations inbetween the lugs better. They are just holes on this drum. Two wheels on the truck have features to clear these pins. Two on the back do not. I drilled the new wheels to clear them. What are they?? __________________ 1968 GMC truck 910 Trim (Canadian) 127" WB 3 on the Three Trans (Saginaw SM330) 250 ci L6 Engine HEI ignition (early 80s L6) Last edited by RyansToy; 05-31-2016 at 08:28 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.