Overheating issue - I am stumped!

[Mattchu60]

I will try to get a picture, but I didnt change anything over the stock setup for the heater hose - disconnected the one from the intake when I removed the engine, hooked it back up with I re-installed. The radiator has a connection point for the coolant to flow into the radiator after it passes through the heater core.

Its like this on mine - leaves the intake near the thermostat, routed into the heater core, leaves heater core and travels to the radiator, leaves radiator and travels to the water pump. This is the stock setup from what I see.