Anybody use a Holley 750 street HP on a SBC?

[Mrturner1]

Truck is a 1970 C10 LWB, 10-1 355 with RHS 170cc heads and comp 280H cam (.480"/.480" and 230 @ .050", Edelbrock performer RPM intake and Edelbrock 650avs carb currently.

I over tightened my current carb and cracked right where the bolt goes through the hole, hangin on somehow, still runs but will need to be welded once I remove it as I'm sure that corner will fall right off, and there's possibly a vacuum leak now.

I don't think my current setup really NEEDS a 750 street HP, but I'm building a pretty roudy 383 right now that will replace the old 355 and I don't want to buy two carbs. I like the 4 corner idle adjustment, and the Dominator bowl. Will this run ok on my current setup for a year or so until I am ready for the 383 to go in?

Another side note, it's more than likely getting boost referenced for the 383 because I really really really want to try a blower or turbo

Truck is driven purely for fun, and will go to the drag strip when it gets to a point where the brakes and suspension are safe enough to go 100+ mph