Disc Brake Conversion: Master Cylinder Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**KyleSeal** · 07-20-2016, 10:10 PM

Planning on putting a set of CPP 2.5" drop spindle disc brakes on my '70 C10 soon, and I know I need a Proportioning Valve, but as far as the MC I've hit a wall.

I cannot seem to find a manual brake disc/drum (keeping rear drum) master cylinder. I see there's one on CPP for a 71-72, will this one fit my C10? I'd imagine so, but there's a lot of things I assumed on this truck and came up wrong.

Also, how do I remove the parking brake line from the rear drum backing plate? Mines frozen and needs to be replaced.

07-20-2016, 10:10 PM	#1
KyleSeal Senior Member Join Date: Mar 2014 Location: Toano, VA Posts: 882	Disc Brake Conversion: Master Cylinder Question Planning on putting a set of CPP 2.5" drop spindle disc brakes on my '70 C10 soon, and I know I need a Proportioning Valve, but as far as the MC I've hit a wall. I cannot seem to find a manual brake disc/drum (keeping rear drum) master cylinder. I see there's one on CPP for a 71-72, will this one fit my C10? I'd imagine so, but there's a lot of things I assumed on this truck and came up wrong. Also, how do I remove the parking brake line from the rear drum backing plate? Mines frozen and needs to be replaced. __________________ "Sometimes I do serve as a good bad example. Glad to be of service." My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.