Front hub nut removal problem - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue Tank · 08-04-2016, 08:45 PM

Hi Guys
I've been trying to remove the front hub nut (35mm one) and it won't budge. This hub was replaced by the local dealer before I got the '04 1500 Burb with AWD. I've tried with a 35mm impact socket and a good 1/2 Ingersoll impact, not the "looks like the good one". I also broke a 1/2 Blackhawk ratchet with a short pipe on it. The 3/4" ratchet wouldn't budge it either. I'm 250 lbs and I think I can come up with 180 ft/lbs using a 3/4 ratchet.
Then I thought they might have put red loctite on it so I heated the nut to 500* and still nothing.
I don't see a thread where anybody else has had this problem. Any ideas?
Thanks
Mark

08-04-2016, 08:45 PM	#1
Blue Tank Registered User Join Date: Jul 2010 Location: CT Posts: 39	Front hub nut removal problem Hi Guys I've been trying to remove the front hub nut (35mm one) and it won't budge. This hub was replaced by the local dealer before I got the '04 1500 Burb with AWD. I've tried with a 35mm impact socket and a good 1/2 Ingersoll impact, not the "looks like the good one". I also broke a 1/2 Blackhawk ratchet with a short pipe on it. The 3/4" ratchet wouldn't budge it either. I'm 250 lbs and I think I can come up with 180 ft/lbs using a 3/4 ratchet. Then I thought they might have put red loctite on it so I heated the nut to 500* and still nothing. I don't see a thread where anybody else has had this problem. Any ideas? Thanks Mark __________________ 69 Camaro 454 6spd/ 1st car and still have it 67 Chevelle 396 Convertible 57 GMC 1/2 t 56 GMC Napco Panel civilian defense 65 GMC v6 long panel 72 Burb



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.