Rear Shock orientation - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jemezcrusher · 09-26-2016, 09:03 PM

I put a TCI parabolic rear spring and shock set up in my 1950 3100. My rear is an 8.8 out of an Exploder. The rear shock crossmember is set up to go behind the rear end. The rear end has a nice sway bar that I planned on using but is going to interfere with the shock location.

Any reason I can't locate to crossmember in front of the rear end at a similar angle as it was supposed to be behind it?

No big horse power. 235 with dual carbs and split exhaust with a T5

09-26-2016, 09:03 PM	#1
Jemezcrusher Registered User Join Date: Nov 2015 Location: Jemez Springs, NM Posts: 435	Rear Shock orientation I put a TCI parabolic rear spring and shock set up in my 1950 3100. My rear is an 8.8 out of an Exploder. The rear shock crossmember is set up to go behind the rear end. The rear end has a nice sway bar that I planned on using but is going to interfere with the shock location. Any reason I can't locate to crossmember in front of the rear end at a similar angle as it was supposed to be behind it? No big horse power. 235 with dual carbs and split exhaust with a T5



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.