PA Extra Parts from Project

[7071lwb]

I have some extra parts I'd like to sell that I've accumulated.
Cab dolly. SOLD
Set of 4 wheels and tires. 6x5.5 bolt pattern, 15" diameter. Tires are not road worthy in my opinion but they do hold air. All wheels are in similar condition. $50
New, unused 67-72 inner cowl patch panel. $150
1 radiator support. Sold
One passenger side front fender. SOLD
Passenger side door. Needs the bottom patched. $25
S10 blazer bucket seats.$40
Black lap belts. SOLD
Stock D44 steering arm off a 1972 K20. This should also fit a K10. $25
Stock front springs off a 1972 K20. SOLD
Rear drum brakes from Eaton HO52. One shoe is cracked, everything else looks good. Pulled for a disc brake swap. Most of the hardware has been sold leaving the backing plates, dust covers, and drums. $50
quadrajet carb. Was running when I pulled it to swap in a holley. $75
Headers for a 350 off a C10. $25
Short sm465 adapter and coupling from a 67 k series truck. Small crack in adapter. Coupling is in good condition. $25
Driveshaft for a shortbed C10 with a TH400. Sold
Drivers side inner fender. SOLD

Pictures for most of this will be in the link below.
I also have some miscellaneous small parts so ask if you need it. All sheet metal is for 69-72 trucks.

Also looking to sell my C10 air ride project either whole or in pieces.http://67-72chevytrucks.com/vboard/s...d.php?t=770522
Part out prices:
cab: SOLD
Original doors that need minimal work. SOLD
Bare frame: $450
front 5 lug suspension, including the front crossmember, spindles, brakes, control arms, etc. I cleaned and painted most of these parts. $300
Rear tubular trailing arms from POL. SOLD
6 lug rear axle with 3.73 rear gears. SOLD
69-72 hood: $125
Outer cowl. $50

I also have a NoLimit panhard bar and rear shock relocator kit with the shocks. SOLD


If you need pictures of specific spots on items let me know and I will get them. I want to get rid of all of this stuff and focus on another project so its no longer worth paying for storage of these items to me. I would much rather sell this stuff on here, I'm at the point where I would rather scrap things than continue to deal with Craigslist