New wiring....no brake lights - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ga-stepside · 10-16-2016, 05:42 PM

I am rewiring my 1967 C10 using a Speedway harness. I got almost everything wired and working except I have no brake lights. There is a orange wire running from the fuse panel to the brake light switch and a white wire coming off the brake light switch that goes to the turn signal connector. I get +12v at the turn signal connector when I press the brake pedal. The steering column is out of the truck so the turn signal switch is not connected. Can I assume the reason the brake lights don’t work is because the steering column with the turn signal switch is not in the truck?

10-16-2016, 05:42 PM	#1
ga-stepside Registered User Join Date: Jan 2016 Location: Sugar Hill GA Posts: 368	New wiring....no brake lights I am rewiring my 1967 C10 using a Speedway harness. I got almost everything wired and working except I have no brake lights. There is a orange wire running from the fuse panel to the brake light switch and a white wire coming off the brake light switch that goes to the turn signal connector. I get +12v at the turn signal connector when I press the brake pedal. The steering column is out of the truck so the turn signal switch is not connected. Can I assume the reason the brake lights don’t work is because the steering column with the turn signal switch is not in the truck? __________________ 1967 C10 Step side 1970 AMX 390 1977 Datsun 280Z highly modified with '95 LT1 power



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.