1967c 30 to k30

[Reid01]

Hello I recently acquired a 67 c 30, 327 4speed with a rotten grain box on it, been sitting for at least ten years but cleaned up distributor and put some gas down carb and it fired right up, gas tank is pretty rusty so working on that now, I have been thinking about making it a 4x4 as I have a Dana 60 out of a 79 k 30 and a Dana 44 out of a 85 k 20 and I also have a turbo 400 with a 203 t case out of the 79 and a nv 4500 with a 205 t case for it, I was wondering if it would be a pretty straight forward swapping in a straight axle using the hardware off one of these trucks? I would like to hear what others experienced, I would like to do it if I don't have to buy parts as if I do I know it would take all th Fun out of it, thanks for your input, I have done two cummins swaps before but never a straight axle swap so I am aware it would take a lot of time but my time is pretty cheap