Removing the bow in the hood

[chrismoore701]

Placed two (2) 3" 2x2's under the hood in the channel at the side, one (1) near the front and the other just in front of the hinge. Took a 4x4 and placed it under the 2x2's and clamped in place with some rubber clamps. Placed a 6" 2x4 on the hood on a towel. Measured the distance I need to squeeze the hood and put a 3/4" pipe clamp on there and squeezed slowly. Over squeezed a little and waited. Removed and checked. Repeat as needed. No damage.