Bell huosing mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**62bagger** · 02-01-2017, 02:12 AM

I have a 62 C10 that has the inline 6 in it. The PO has put a newer front cross member so the front motor mount is no longer there. I can mount the motor at the side of the block but I have the bell housing mounted to a cross member. I am switching to a 5 speed trans an was wondering if I need to eliminate the bell housing mounts and use a transmission mount. If I get rid of the BH mounts will the x member it was bolted to need to go away? As you can tell this is my first time attempting this type of modification. any one out there encountered this situation?
Thanks

02-01-2017, 02:12 AM	#1
62bagger Senior Member Join Date: Mar 2016 Location: Sonora California Posts: 285	Bell huosing mounts I have a 62 C10 that has the inline 6 in it. The PO has put a newer front cross member so the front motor mount is no longer there. I can mount the motor at the side of the block but I have the bell housing mounted to a cross member. I am switching to a 5 speed trans an was wondering if I need to eliminate the bell housing mounts and use a transmission mount. If I get rid of the BH mounts will the x member it was bolted to need to go away? As you can tell this is my first time attempting this type of modification. any one out there encountered this situation? Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.