03-30-2017, 06:46 PM | #1 |
Registered User
Join Date: Aug 2010
Location: kingman,az
Posts: 23
|
amp gauge?
after many years, I got busy and fixed the small black wire which goes to the amp gauge. I disconnected the printed plastic, tested the gauge, and the needle swings max. both ways. however, with everything connected, the needle only moves about 1 needle width.
I soldered a piece from the salvage yard at the driver side connection. could not find another one for the pass side. the original had been eaten by Batt. acid. I replaced it with a universal plastic fuse holder. is it possible there is too much resistance in the circuit now? or is there something I am overlooking? thanks Rod in AZ |
Bookmarks |
|
|