New Distributor NO START!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

79K10 · 04-04-2004, 11:28 PM

Hello folks! I am pretty new to this forum and just in time. I just bought a 1980 Suburban that was pinging under a load and checked the timing. Turns out the mechanical advance was rusted and causing the pinging it was letting it advance about 30 degrees. I decided to replace everything from the plugs to the Distributor itself and now I can't get it start or even want to start so I have tried to start at tdc and face the rotor at the #1 wire and nothing. If anyone one can tell me anything it would be great.

04-04-2004, 11:28 PM	#1
79K10 Registered User Join Date: Mar 2004 Location: North Dakota Posts: 5	New Distributor NO START!!! Hello folks! I am pretty new to this forum and just in time. I just bought a 1980 Suburban that was pinging under a load and checked the timing. Turns out the mechanical advance was rusted and causing the pinging it was letting it advance about 30 degrees. I decided to replace everything from the plugs to the Distributor itself and now I can't get it start or even want to start so I have tried to start at tdc and face the rotor at the #1 wire and nothing. If anyone one can tell me anything it would be great.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.