Question About Right Stuff Booster on a '68 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NoNeck · 04-05-2017, 03:08 PM

We recently added a 9" Booster from Right Stuff along with a Wilwood Master Cylinder and Adjustable Proportioning Valve. The booster came with brackets that bolted to the original firewall bolts. We went with the smaller diameter booster to clear the tall valve covers on the big block.

My question is, does the booster look too far away from the firewall? It has been so long since we saw a booster/master on the truck, so it may just be me. The original booster set up came with the factory brackets that stuck out even more than the Right Stuff ones.

I don't know. Should I fabricate new brackets that are about 1.5" shorter to make it mount closer to the firewall? Or, does it look OK to you guys?

POP

04-05-2017, 03:08 PM	#1
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Question About Right Stuff Booster on a '68 We recently added a 9" Booster from Right Stuff along with a Wilwood Master Cylinder and Adjustable Proportioning Valve. The booster came with brackets that bolted to the original firewall bolts. We went with the smaller diameter booster to clear the tall valve covers on the big block. My question is, does the booster look too far away from the firewall? It has been so long since we saw a booster/master on the truck, so it may just be me. The original booster set up came with the factory brackets that stuck out even more than the Right Stuff ones. I don't know. Should I fabricate new brackets that are about 1.5" shorter to make it mount closer to the firewall? Or, does it look OK to you guys? POP Attached Images __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.