TX WTB 3/8 tank to frame fuel line and in cab fuel tank vent loop - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 04-30-2017, 10:18 PM

A few years back I bought a 70 Longhorn with no fuel tank. I finally got around to swapping in a tank I had out of a 71. I am looking for the steel line that goes from the sending unit through the floor to the fuel line on the frame under the cab (3/8, its a big block truck)Also, if I remember correctly, there is a vent loop that goes up in between the two layers of the cab corner by the rear window. I thought I had the one from the truck I parted out that the fuel tank came out of, but I can't find either one anywhere. Does anyone have either one or can they give me a photo of the vent line (I can bend up my own)?

04-30-2017, 10:18 PM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	WTB 3/8 tank to frame fuel line and in cab fuel tank vent loop A few years back I bought a 70 Longhorn with no fuel tank. I finally got around to swapping in a tank I had out of a 71. I am looking for the steel line that goes from the sending unit through the floor to the fuel line on the frame under the cab (3/8, its a big block truck)Also, if I remember correctly, there is a vent loop that goes up in between the two layers of the cab corner by the rear window. I thought I had the one from the truck I parted out that the fuel tank came out of, but I can't find either one anywhere. Does anyone have either one or can they give me a photo of the vent line (I can bend up my own)?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.