1966 C10 height ground to bottom of wheel lip moulding question

[64jmb]

Had a question all.

I have a 1966 C10 Short bed V8 truck.

What is the stock height from the ground to bottom on the front end of the wheel lip moulding on a 1966 C10 with a V8 form the factory?

Mine height now is 26 7/8" in the front and really like that height it is perfect and riding on a 15 x 6 stock Chevrolet Wheel 235-75 R15 tire.
My springs need to be changed. I am putting 2.5 drop spindles on it...and do I need a 1 or 2 drop spring? My coils were cut 1.5 coils off, which I think is 3 1/4 "Inches? need some help on this.
My camber is off 1.5 degrees on one side a 2 degrees on the other....so I want to get the same stance. But too much was cut off the springs to set the camber now correctly.
I have purchased 2.5 drop spindles now, and 1" drop springs. I think I may need a 2" drop springs to achieve the same look?? I just have to make sure I can set the camber and tow correctly now.. would this be right...Thoughts....