Rear axle centering to bed wheel well - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**First c10** · 05-17-2017, 08:28 PM

Hey guys has anyone cut the front of the bed so the axle/wheel was centered in the bed wheel well?
I was told that with a load the axle moves back. But that means it is always off center like 95% of the time and fine when you have a load in bed or when towing. 5% or less. My truck will probably never have a load in it.

So I was thinking of cutting a pie shape out of the front and moving the lip forward 1"

If you have a link or a place where you have see it or done it please let me know.
Thank you
Scott

05-17-2017, 08:28 PM	#1
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Rear axle centering to bed wheel well Hey guys has anyone cut the front of the bed so the axle/wheel was centered in the bed wheel well? I was told that with a load the axle moves back. But that means it is always off center like 95% of the time and fine when you have a load in bed or when towing. 5% or less. My truck will probably never have a load in it. So I was thinking of cutting a pie shape out of the front and moving the lip forward 1" If you have a link or a place where you have see it or done it please let me know. Thank you Scott Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.