The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > Heavy Haulers

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-07-2017, 11:24 AM   #1
sick_46
Registered User
 
Join Date: Jun 2016
Location: Adel Ga
Posts: 16
another brake question 70 c-50

I am trying to get my brakes working on my 70 c/50 without converting to hydroboost. I have the master cylinder on the firewall and the booster under the cab. I replaced the master cylinder and began to bleed the brakes. I got good fluid from the remote master under the cab. then went to the rear. both the rear bled out fine. the fronts however will not bleed. i removed the bleeders completely to make sure they are open and not clogged up. they are clean and I can blow through them. but no fluid comes out. I cracked the line where it splits and goes to the 2 front wheels and I am getting good pressure there. I am thinking its either the rubber hoses going to the front wheel cyliners are collapsed inside or I have a wheel cylinder problem. Has anyone experienced this before?
sick_46 is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:38 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com